What is the EVC RFID function, how to use it?

If the user wants to switch to the card-swiping pattern from the default pattern, the user needs to enable RFID function and do card activation operation in APP advanced settings. Please follow the instructions below:
1) Touch “RFID Function” to enable the function as below (Disable by default).
2) Activate the RFID card:
a. Enable the Card Activation Mode of Advanced Settings in the APP (Disable by default). Once enabled, the four operating LED indicator lights on the EVCharger will light up in sequence and cycle.
b. Swipe the RFID card at the EV-Charger.
c. If successfully activated, the EV-Charger will beep.
d. Disable the Card Activation Mode in the APP or wait for 1 minute after
activation, the EV-Charger will turn to standby state.