How to set the battery charge and discharge current?

To set the battery charge and discharge current, you can follow these steps:

1. Access the Inverter Settings: Navigate to the settings menu on your inverter's interface. This is usually accessible via a display panel or through a connected app.

2. Locate Battery Settings: Within the settings menu, find the section dedicated to battery management or settings. This is where you can adjust parameters related to charging and discharging.

3. Set Charge Current:

   • Look for an option labeled "Charge Current" or similar.
   • Adjust the value to your desired level. Make sure not to exceed the maximum recommended charge current specified in your battery’s manual to avoid damaging the battery.

4. Set Discharge Current:

   • Find an option for "Discharge Current" or equivalent.
   • Set this value according to your needs, again ensuring it does not surpass the maximum discharge current specified for your battery model.

5. Save and Apply Changes: After making adjustments, save the settings. The inverter should apply the new charge and discharge current values immediately.

6. Monitor Performance: Keep an eye on the system performance to ensure that the new settings are working correctly and that there are no adverse effects on your system.