Peter
- Total activity 2372
- Last activity
- Member since
- Following 0 users
- Followed by 2 users
- Votes 1
- Subscriptions 2371
Articles
Recent activity by Peter-
Does CT need an address setting?
No, only the meter needs address setting; CT does not.
-
What will happen if Meter is selected in the menu but not installed or installed incorrectly?
The inverter will trigger a “meter fault” alarm.
-
What is the maximum communication distance for CT to inverter?
CT communication distance should not exceed 100 meters.
-
What is the maximum communication distance between the meter and inverter?
The meter‑inverter communication distance should not exceed 200 meters.
-
Is zero injection applicable in all scenarios of AC coupling system?
No, zero injection is not applicable in some situations in this system.
-
What is the function of the second meter in the AC coupling system?
The second meter is used for yield monitoring only.
-
Does the wifi + lan 2.0 dongle support local firmware upgrade?
Yes, it supports this kind of function, kind follow the steps below:S1. Connection the AP of the wifi+lan 2.0 dongleS2. Open your browser and input:192.168.10.10
-
How to reboot the wifi+lan 2.0 dongle?
Double press the reset button.
-
I can find my wifi+lan 2.0 dongle wifi signal, what should I do?
Please short press the reset button and then release, the AP will be shown.
-
How to enable the wifi+lan 2.0 dongle AP?
Please short press the reset button and then release, the AP will be shown.