
Peter
- Total activity 4653
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 2326
Articles
Recent activity by Peter-
Does SolaX 4G dongle support local mode?
No, it does not support this kind of action.
-
Does it support to reset the "Enviromental benefits" value?
No, it does not support this kind of action.
-
Does SK-SU inverter support M1-40 meter?
No, the M series SolaX meter does not support the old inverter.
-
Does SK-SU inverter support meter?
Yes, it support both meter and CT.
-
What if I delete my site and unbind my dongle, will I lost all the history data?
Yes, after delete the site, you will lost all the history data.
-
Can I use the BMS of T45 battery with the T30 battery?
No, it does not support T30 battery, for T30 battery, you need to use T30 BMS. But you can use it with T63 battery.
-
What does the "Self Test" function do?
Primarily for CEI 0-21 compliance (Italy), it tests grid protection functions (over/under voltage/frequency) and reaction times. A report is displayed on the LCD. Requires grid connection.
-
What does the "Battery Awaken" function do?
If the battery voltage drops too low (below Discharge Cut for Lead-acid or Min Capacity for Lithium), enabling "Battery Awaken" forces charging from PV or grid (if enabled) to recover the battery. ...
-
What size AC cable and breaker are recommended for grid connection for X3-Hybrid G2 inverter?
Recommended cable size is 4-6mm². Recommended breaker sizes are 20A (5.0/6.0kW), 25A (8.0kW), or 32A (10.0kW). Always follow local regulations.
-
What is the IP rating and where can X3-Hybrid G2 inverter be installed?
The inverter has an IP65 rating, making it suitable for outdoor installation. Mount on a solid wall (brick/concrete) within ±5° slope, avoiding direct sunlight, rain exposure, and ensuring good ven...