Peter
- Total activity 4656
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 1
- Subscriptions 2327
Articles
Recent activity by Peter-
Does PRO inverter have to connect with a meter?
It is not must, only if you want to obtain the feed in statistics.
-
Why I can not add the site of End user to my installer account?
Please check whether it is already been added to another installer account, one ender user account can only bind with one installer.
-
Why is the fan so loud when running?
Please check whether there is something stick on the fan which leads to the noise.
-
Can I use Matebox advanced for parallel system?
No，it does not support.
-
Why does my X3-hybrid-G4 not start the fan when it feels very warm on the surface of the inverter?
The fan starts to work when the internal temperature reaches 70 degree.
-
Can I clamp CT on the N and L wire simultaneously?
No, please clamp the CT clamp on L line from the home main meter box side.
-
Why can’t my battery be charged with full power?
Because the charging power is related to SoC, voltage and cell temperature, SoC too low or too high, voltage too high, temperature too low will affect the charging power.
-
What is the maximum parallel quantity for X1-Mini if I use modbus?
Using modbus you can parallel up to 5 inverters, you also need to set master and slave, and modbus address, for mini only CT is supported in modbus parallel system.
-
Newly installed inverter, why I can not change the safety code from solax app?
Please make sure the pv connection is ok and DC switch is on, and the pv voltage is higher than your inverter start work voltage. If still no luck, please contact solax to update the firmware or fo...
-
At what temperature the inverter fan will start working?
Please be advised that for different inverters, the temperature is different, please provide your inverter type and contact solax support for more details.