Peter

Currently, ​​hardware supports V2X​​ (V2G, V2H, V2L), but full software integration for EV charging and OCPP 2.0 compliance is under development.

The X1-VAST achieves a ​​UPS-level switchover time of 10ms​​ for both single and parallel systems when fast switching is enabled.

The X1-VAST achieves a ​​UPS-level switchover time of 10ms​​ for both single and parallel systems when fast switching is enabled.

Key improvements include ​​4 MPPTs​​ (vs. 2), ​​20A PV input per MPPT​​ (vs. 16A), ​​dual battery ports supporting 50A total current​​, ​​IP66 rating​​ (vs. IP65), ​​V2X compatibility​​, and a ​​lo...

In green mode, when the current level is set to 3A, the EVC will start working when the PV surplus current reaches 3A. If the PV surplus current is between 3A and 6A, the EVC will draw power from t...

Please refer to this link:https://kb.solaxpower.com/faq/detail/8af1c4b293a5cd4b0193ba1c688f0773

Yes, it support EPS mode. EPS mode activates when the grid is off.

Please click here to get SolaX Global contact numbers:https://www.solaxpower.com/contact/

To set the battery charge and discharge current, you can follow these steps: Access the Inverter Settings: Navigate to the settings menu on your inverter's interface. This is usually accessible v...

The Super-Backup function allows the inverter to enter EPS (off-grid) mode using only PV input, even without battery input. This feature is disabled by default but can be enabled in the EPS Setting...