Peter

The inverter supports two independent battery terminals. The input voltage of each BAT terminal should be higher than 80 V and lower than 480 V. If two string batteries are connected separately, th...

The grid voltage and frequency must be within the allowable range (220 V / 230 V, 240 V, 50 / 60 Hz). An appropriate AC breaker must be used, and if required by local regulations, an external RCD (...

VPP, also known as Virtual Power Plant, is a network of decentralized energy-generation systems, like solar systems, that are linked together and managed by a VPP operation platform.With support fo...

It detects DC-side arcs (≤300J energy) within ​​≤500ms​​, disconnects the circuit, and auto-resets after 5 minutes (up to 5 times/day). Manual reset is required after repeated faults.

​HS25, HS36, HS50E-D​​, and ​​HS51​​ (limited use) are compatible. HS50E-D is preferred for its modularity and compact design.

Yes, users can set ​​hourly modes (self-use, peak shaving, etc.) for 7 days​​, with holiday settings and bulk deployment support (coming soon).

It checks ​​meter/CT connections, battery status, PV output, EPS, fan health, and communication​​ during startup.

Up to ​​2 units​​ can be paralleled without a parallel box.

Yes, it supports this function, during grid outages, the X1-VAST can ​​simulate a grid signal​​ to activate third-party string inverters via its EPS port, enabling PV power use in off-grid mode.