Peter
- Total activity 4645
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 2322
Articles
Recent activity by Peter-
What is the purpose of the BMS port in Solax inverter?
The BMS port communicates with the battery. Ensure pin definitions match the battery’s specifications
-
What is the protection rating of X1-SPLIT inverters?
The X1-SPLIT series has an IP65 rating, making it suitable for outdoor installation.
-
Can I connect a generator to the X1-Vast inverter?
Yes, via the ATS (Automatic Transfer Switch) or dry contact mode. Ensure generator compatibility and follow wiring guidelines
-
Why is my inverter displaying a "BatPowerLow" error?
The battery has reached the minimum SOC (State of Charge) in EPS mode. Recharge the battery via PV/grid or adjust SOC settings
-
What is the purpose of Export Control?
Limits the amount of solar power exported to the grid (0–60,000 W). Set via the inverter LCD or app to comply with grid regulations
-
How do I choose between Self Use, Feed-in Priority, and Backup modes?
Self Use: Prioritizes powering loads, then charging the battery, and exports excess to the grid. Ideal for low feed-in tariffs. Feed-in Priority: Exports excess PV power to the grid first....
-
How do I maintain the X1-VAST series inverter?
Regular maintenance includes checking electrical connections, grounding reliability, heat sink for foreign objects, and the general status of the inverter every 12 months or more frequently in infe...
-
What should I do if the X1-VAST series inverter encounters a fault?
Check for warning or error messages on the system control panel or App. Refer to the troubleshooting list in the manual. For example, if it shows "IE01 - TZ Protect Fault", wait for a while, discon...
-
How do I operate the X1-VAST series inverter on the LCD screen?
The LCD screen has a control panel with keys for navigation and setting. You can switch on/off the inverter, select the working mode, view system status, and set parameters in the menu. For example...
-
What are the working modes of the X1-VAST series inverter and how do I choose them?
The working modes include Self Use, Feed - in Priority, Backup, Peak shaving, TOU, and Manual. You can choose the mode according to your lifestyle and environment. For example, Self Use mode is sui...