FAQ
- Does X3 Hybrid G2 support EPS Box?
- What does the Min Esc Soc means for Eps setting
- Does X3 Hybrid G4 supports peak shaving mode?
- Does the normal X3-G4 model support 127V/220V mode?
- What is the main differences between Adapter G1 and G2？
- What does unusual idle mean?
- For the x1-hybrid-g4, for example 5kW, how much is the EPS output power?
- When the inverter in EPS Mode, is there any way to mute the beep sound from inverter?
- Do all SolaX inverters support external generators ?
- How to connect the communication cable of two X3-Hybrid-G4 in parallel ?
- Why my battery charge or discharge in a low power ?
- Why limit system output power？
- What scenarios is Backup Mode used for?
- X3 ultra, to realize whole home load, should I have any accessaries?
- If it's a X1 hybrid + second on-grid inverter with 2 CTs, is there something to be set to make it work?
- Tou function is open to every Solax inverter?
- Can the X3 Hybrid G4 8kW inverter and the X3 Hybrid G4 10kW inverter be paralleled?
- Possible to charge more than one battery at the same time with the battery charger?
- From where comes the energy to heat the battery? PV (if enough) or grid?
- Why my inverter diplays NTC sample fault ?
- When will the fan of X3-Hybrid G4 start to work?
- Can I install 4 T58 batteries for my X3-hybrid G4 inverter?
- Does solax X1-hybrid support running under off grid?
- Can I use CheckWatt on my X3-hybrid-G4 inverter?
- Do we have to install the 2nd meter in order for a 3rd party on-grid inverter to charge the Hybird batteries?
- Can SK-SU support Lan connection?
- What is the Min number of T30 batteries required to start the X3-Hybrid G4 inverter?
- How should I intsall the 2nd meter for X3-Hybrid system? or can I use for the 2nd one the CT?
- Is SolaX X3- Hybrid G4 inverter compatible with the PYLONTECH batteries I already have?
- Does X3-ULTRA support Modbus?