FAQ
- Is a meter connection mandatory for X3-Hybrid G2 inverter?
- What is the switchover time to EPS mode during a grid failure for X3-Hybrid G2 inverter?
- What battery types and voltages are compatible with X3-Hybrid G2 inverter?
- What is the maximum number of inverters that can be connected in parallel for X3-Hybrid G2 inverter based on on-grid operation?
- What are the key differences between Version E and Version C for X3-Hybrid G2 inverter?
- What do the model number suffixes (E, C, D, N) mean for X3-Hybrid G2 inverter?
- Does the X-Smart G1 inverter support battery storage?
- Can I use third-party meters?
- What does "Bus Volt Fault" mean?
- How do I set export control for my X1-Smart G1 inverter?
- How should PV modules be grounded?
- What surge protection is needed for X1-Smart G1?
- Is an external RCD required for X1-Smart G1?
- What cable size is required for AC grid connection of X1-Smart G1 inverter?
- Can I install the inverter of X1-Smart G1 outdoors?
- What is the difference between models ending in "-D" and "-N" for X1-Smart G1?
- How does the "GMPPT" function mitigate shading losses and what are the scanning mode trade-offs?
- What are the potential consequences of incorrect "Meter Direction" setting?
- What is the AFCI (ArcCheck) functionality, its self-test procedure, and fault clearing options.
- What is the function of "Earth Detect" in X1-Smart G2 settings and what happens if it's enabled and grounding is absent?
- Can you describe the operational difference between "Soft Limit" and "Hard Limit" in Export Control or General Control. in X1-Smart G2 settings?
- Can you explain the procedure and purpose of the "Check Meter/CT" function in X1-Smart G4 settings?.
- What are the specific clearance requirements for installing multiple X1-SMART G2 inverters?
- What is the significance of the "T" suffix in models like X1-SMT-10KT-G2?
- In parallel system, do I need to set the safety code for slave inverter?
- What is the switchover time to EPS output during a grid failure for SK-SU inverter?
- How is communication established between the SK-TL (Hybrid Ready) inverter and the external BMU?
- What happens during an EPS event (grid failure) if the connected load exceeds the inverter's EPS rating?
- How does the "Force Time Use" mode operate, and what user-configurable options does it offer for Sk-SU inverter??
- Why is a Type B Residual Current Device (RCD) mandatory on the AC supply side for SK-SU inverter?