Skip to main content
-
What is the main function of RCD?
-
What is the main function of MCB?
-
What is OBC and its function?
-
What is the meaning of "EPS（Par" showing on my inverter LCD?
-
Why the power unit in solax cloud flow chart is not the same, sometimes the PV power unit is "KW", but battery power unit is "W"?
-
Is it normal inverter enter into idle status when it is under EPS mode?
-
Is the "discharging" in TOU mode force discharge the battery even though there is no power needed?
-
In TOU mode, if I select "Battery Off" mode, will battery be charged?
-
When my inverter is offline, can I use the function of "Installation Check" in my inverter settings?
-
Does X1-Fit G4 support Micro Grid solution?
-
Should I select CT or meter in EVC "Grid Data Source" when I connect my EVC to datahub1000?
-
Does the DTSU666 smart meter have to be branded Solax or does that not matter?
-
What are the common half wave loads?
-
What is the difference between D version Hybrid inverter and M version Hybrid inverter?
-
How to set the "TOU tafiff" from my solax app?
-
How to solve EVC "ElecLock_Fault" issue?
-
What is the maximum number of RFID cards that the Solax EVC G2 can store locally?
-
Does Solax EVC G2 support parallel solution?
-
What is the different between Per phase control and total phase control?
-
What is the difference between modbus tcp and modbus rtu
-
How to power off X3-NEO-LV inverter?
-
I can see the server address but the data is not uploading to cloud, why?
-
During the webpage when setting my Dongle it fails to connect with router, how to do?
-
During the webpage setting, my Dongle fails to recognize the inverter, how to do?
-
When I scan QR code by APP it displays “Register No. not valid”, how to do?
-
My laptop/smartphone fails to connect dongle’s network, how to do?
-
No dongle’s hotspot found after dongle inserted, how to do?
-
What is the meaning of "Phase Self Adaption" in my X3-NEO-LV inverter settings?
-
What is the meaning of "Return To Battery Voltage/SOC" in my X3-NEO-LV inverter settings?
-
What is the meaning of "Return To Utility Voltage/SOC" in my X3-NEO-LV inverter settings?