FAQ
- Can I set a certain time period in solax EVC settings to charge my EV?
- What is the difference between the V1 and V2 versions of the T58 battery?
- During update firmware verison period, will the inverter still generate power?
- As an installer, can I check the inverter firmware version via solax app or cloud?
- As an installer, can I downgrade the firmware version for my end user inverter?
- As an installer, can I update the firmware for my end user?
- Can I recover my site after delete?
- What is the defaut password for Solax Chint meter?
- Are the “slave +/-” and “master +/-” in the BMS parallel box G2 in parallel?
- Why on my site it shows PV power during the mid-night?
- Can I connect my T30 batteries to BMS parallel G2 without master battery?
- Can I set the battery charging period same to discharging period?
- Can I use EPS parallel box to parallel string inverter?
- Can I install three T30 in stack?
- Does the X3-Ultra-25K satisfy G99 and G100 certification？
- Why although I set export control 0, but still small power send to grid, my inverter is X3-Hybrid-G2?
- Does solax wifi dongle support routing function?
- If the meter is faulty, will it influence the battery charge and discharge function?
- Will T58 battery support heat function in the future?
- When I set force discharge my battery, will my battery discharge below the mini soc?
- Can I connect my ups to my inverter EPS port?
- What is the charging current if I set force charge my battery?
- Do I need to install a MCB betweent X3-hybrid-G4 and batteries?
- Does the 3 phase inverter support connect only single phase?
- After the battery soc reaches 10%，how long does it take till the battery turn to dead when the battery is turned off?
- What is the battery self-cost power when the inverter is under normal mode?
- How to do when the inverter showing DSP wrong at boot?
- What is the refresh time of the data on the cloud?
- what is the maximum unbalanced output power for the hybrid inverter?
- How to upgrade the firmware for X1-hybrid-G3?